S428 Double Dry Gas Seal for Overhung Compressor

Operating Parameters
● Pressure: ≤4MPa ● Temperature: -160~260℃ ● Shaft Diameter: 25~360mm ● Speed: ≤50000r/min ● Linear Velocity: ≤180m/s The above limit application parameters are not met simultaneously, customized design for particular applications.
Product Description
● Suitable for low temperature, high temperature, high speed and harsh application conditions. ● Non-contact running seal face. ● The two groups of seal are arranged back to back. ● The surrounding design for seat effectively reduces the damage of equipment which caused by broken  seat. ● The auxiliary seal uses high-performance polymer seal which has good temperature resistance, pressure  resistance, and corrosion resistance. ● Zero leakage of process gas can be achieved, and trace nitrogen will leak into the body and enter the  process system. ● Unidirectional grooves and bidirectional grooves are available. ● Cartridge design is easy for installation and dismantling. ● Suitable for low pressure and process gas quality is poor, toxic, harmful, corrosive occasions.
Interface Details
● A Buffer Gas     Nitrogen/From compressor discharge, nitrogen is preferred ● B Seal Gas      Nitrogen/Other inert gases, nitrogen is preferred ● C Leakage Gas     Vent to safe location ● D Separation Gas   Nitrogen/Instrument air, nitrogen is Preferred
Recommended Applications
● Nitric Acid Reduction Reaction Gas Compressor ● Carbon Monoxide Replacement Gas Compressor ● Nitric Oxide Recycle Gas Compressor ● High Speed Gear Compressor (Expander)
Materials and Configurations

Categories

Components

Standard Materials

Optional Configurations

Seal Rings

Seat

SiC

WC、Silicon Nitride

Face

Carbon Graphite

Silicon Carbide(DLC)

Elastic Elements

Spring

Hast.C

Inconel718

Metal Parts

Sleeve

1Cr13、2Cr13

17-4PH、2205、316L

Housing

Secondary Seals

Polymer Seal

PTFE

/

Auxiliary Seals

Polymer Seal

PTFE

/

Separation Seal

/

Labyrinth Seal

Carbon Ring Seal

Determine the best material configuration based on different operating conditions, customer require- ments, execution standards, and application scenarios.

Performance